Overhaul a Car Machine with Easewhich means thorough checking and if defined from the engine over haul is to dismantle the car components done thoroughly so that it can be valid with the aim of correcting the existing problem correctly. Overhaul is generally done for abnormal machine problems. oil burning due to ringpiston wear, low compression, piston damage, crankshaft, piston rod and many other problems. .for steps and how to overhaulmesin the car in full can you directly refer to the following reviews .
1. Cool the Machine
Make sure the machine is in a cold state that does not endanger you when removing each component from the machine and make sure that the cooling water must also be empty
1. Remove the Valve Cover
The first thing to do is to remove the lid on the top of the blade or valve, then remove the intake manifold or the exhaust pipe attached to the silin head
1.Remove Distributor
remove the nut on the water pump holder and remove the alternator setter handle and remove the water pump and the gasket
1. Remove Engine Oil,
The next step to do is remove the oil from the machine, the way is to open the bolt pembungan on the charter using a special key so that the oil can be removed .
1. Remove the Cylindrical Head Bolt
The existing bolt binding the cylinder head must also be opened by using a cross direction so that the power of the compressive force can remain in a balanced state at all parts of the cylinder head
1. Cool the Machine
Make sure the machine is in a cold state that does not endanger you when removing each component from the machine and make sure that the cooling water must also be empty
1. Remove the Valve Cover
The first thing to do is to remove the lid on the top of the blade or valve, then remove the intake manifold or the exhaust pipe attached to the silin head
1.Remove Distributor
remove the nut on the water pump holder and remove the alternator setter handle and remove the water pump and the gasket
1. Remove Engine Oil,
The next step to do is remove the oil from the machine, the way is to open the bolt pembungan on the charter using a special key so that the oil can be removed .
1. Remove the Cylindrical Head Bolt
The existing bolt binding the cylinder head must also be opened by using a cross direction so that the power of the compressive force can remain in a balanced state at all parts of the cylinder head
No comments:
Post a Comment