Zamzam

Showing posts with label car body. Show all posts
Showing posts with label car body. Show all posts

Tuesday, April 24, 2018

5 ways to fix dented car body with ease

 Experiencing an incident that causes your personal car to experience a mild collision can cause your car's condition is not as good as before as having a dent or arch at the door, bumper, car body, and others .The surface of a dented car can actually be overcome by bringing it to the workshop, however it will cost you a lot. Not to mention if you have to queue for hours in the workshop to get your car body to be as smooth as the beginning. But just calm down, you can fix your car body that dent itself at home without having body repair. Well here are some solutions how to fix a dented car body .
   5 ways to fix dented car body with ease


1.Using Hair Dryer and Carbon Dioxide             Liquid

 You can use a hair dryer or a hair dryer and with the help of carbon dioxide fluid as one way to repair a dented car body. You can buy liquid carbon dioxide at nearby chemical stores. Here are the steps to fix the car body with a hair dryer :

#First prepare the hair dryer first and a           bottle of liquid carbon dioxide.
#Turn on the hair dryer and then direct the     hot air into the body of a dented car.
#Do it continuously until it feels hot                  enough. Heating the area will be different    from any severe condition or not its dent      your car. For large dents usually takes at      least 3-5 minutes.
#After that, immediately spray liquid                carbon dioxide on the heated part.
#Then press it again until it returns to its         original form.


This method utilizes sudden temperature changes from hot to cold, where the dent of this car body will be attracted due to the thrill of the thrust that arises due to drastic temperature changes in a short time. as you know, a hair dryer is able to increase temperature dramatically and carbon dioxide fluid is able to lower it rapidly around -109 degrees centigrade. with drastic temperature changes can restore the shape of the car body that had been dented to be flat and returned to its original form. but remember, this way you can only use to fix a car that dents with small size not on a large scale and there are parts that are destroyed .
 can fix your dented car body using a hair dryer but in a more traditional way. But this way should be done by two people to be more easily done. one person will be in charge of directing the blow dryer to the dented car parts while the other one is in charge of pushing the dented car parts. The trick is very easy, just point the hair dryer to the body parts of the car that dented. the warmer the temperature of the hair dryer will be the better.
 After it is already hot enough, the second person will push the dented part from the inner side to the outside. Do the drive strongly and quickly for parts of the car that the dent is still in a hot state .
 After that, your car body will return to its original shape. The simple principle of this way is that the car's periphery is made of metal, where the metal material will be easily formed when it is hot. the strong impulse will make the dented car part will be pushed back to its original position ..


 2.Using Hot Water


#.Prepare in advance the hot water that           you  will use to heat your car body.
#.Pour little by little of hot water into the         body of your car is dented. You can use a       kettle or water kettle as a container of hot     water.
#.Use the fabric to apply pressure to the           dented car parts until it returns to its             previous shape.
#.You need to pay attention is not too hard       to put pressure on the part of your car,         which there will be too missed so make         your car shape change or even body can       break.
#.Repeat the above steps up to several               times  to get maximum results.

  How to fix the body of a car dented by using hot water is indeed already well known by the general public, even many have proven this way. This also you can do even though the bumper of your car has a parking sensor rear. but remember, this way you can only do for the type of bumper that is made from plastic or carbon fiber so that when you water it with hot water can make it easier for you to pull out the car parts that dented earlier. this is in line with the laws of physics you learned when in school





Translate

Zamzam

Popular Posts